|
|
QSB - MOTOR OIL ADDITIVES ....Products with more value then cost | |
| ||
|
|
QSB - MOTOR OIL ADDITIVES ....Products with more value then cost | |
| ||
Field's tests were managed on 8 buses.
Before fill up with QSB
Total covered Km: 124.153.
Total fuel consumption Lt: 50.755.
Fuel consumption 1/100 Km 40.88.
After fill up with QSB.
Total covered Km: 144.309.
Total fuel consumption Lt: 52.866.
Fuel consumption 1/100 Km 36.63.
FUEL SAVINGS: 10,4%
Following is a short resume of results from comparative test using Castrol RS without QSB versus Castrol RS mixed with QSB. These results were autonomally obtained by British Institute for Atomic Power. They indicated real and economic use of QSB.
This test has been performed with a worldwide known and appreciated motor oil. Results coming from many other tests are not reliable because of they didn't compare it with right percentage/dilute recommended on instructions.
Principal function of QSB is to preserve and lubricate, but not only, reduction of friction and PULL OUT the HIDDEN POWER of your engine is another tremendous improvement. This allows you to a general medium fuel saving of 9% and a gain of 5-7HP.
"You can use it on every model and cubic capacity" mentioned Land Rover Magazine.
Report of Institute for Atomic Power - United Kingdom
QSB pure tested - 1P239/85 Dobson Method
Explanation:
*Hertz's & Dobson's medium load: this load indicates load oil transportation ability.
DATA DESCRIPTION:
Seize initial load: 70 Kg (154 lb).
Medium Hertz Dobson 10g62 load
FRICTION AND WEAR & TEAR TEST:
Test temperature: 100�C
Test load: 180Kg
Friction typical coefficient: 0,09
Test sphere medium diameter mark: 1.08 mm
